[vc_row][vc_column][vc_column_text]

Common LG Dryers Problems And How To Fix Them

[/vc_column_text][vc_column_text]

Undeniably, your laundry routine can suffer quite a lot because of a faulty dryer. LG produces high efficient and reliable appliances, that are well-trusted in the U.S. But no matter the production quality, your appliance may be at fault for a variety of other reasons – such as insufficient maintenance, improper use or worn-out parts. Let’s find out what prevents your dryer from working properly and how to fix these unpleasant issues.

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_message message_box_color=”warning” icon_fontawesome=”fa fa-plug” css_animation=”appear”]

Unplug your appliance before attempting any service!

We highly recommend our readers to only perform a DIY repair if they have certain expertise or prior experience in this field. Otherwise, we are always happy to offer our professional assistance.

[/vc_message][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]

The Dryer Is Not Heating Properly

[/vc_column_text][vc_row_inner][vc_column_inner width=”1/3″][vc_column_text]

Thermal fuse

[/vc_column_text][vc_single_image image=”1208″ img_size=”full” alignment=”center”][vc_column_text]

Probably the most common problem that our customers face is the lack of heating. To determine what causes your problem, first check whether the appliance is receiving power. Dryers need a 240-volt circuit supplied by two 120-volt lines to start and operate properly. If only one of the lines is working, the dryer will run but not heat up. If the power supply is fine, consider checking other parts of the appliance. A thermal fuse might also be a source of the problem. Its function is to cut off the power when the dryer is overheating to reduce the risk of a fire. To replace the thermal fuse, you need to disassemble the back panel of the dryer. Find the thermal fuse and disconnect the wires.

[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][vc_column_text]

Heating element

[/vc_column_text][vc_single_image image=”1209″ img_size=”full” alignment=”center”][vc_column_text]

The next thing you need to check is the heating element. Disassemble the back panel, disconnect the wires and pull off the heating element. If there is no visual damage on the coils, perform a continuity test with a multimeter. Consider replacing the faulty part if necessary.

[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][vc_column_text]

Timer

[/vc_column_text][vc_single_image image=”1210″ img_size=”full” alignment=”center”][vc_column_text]

Finally, check the timer. Its function is to control the dryer motor and heat circuit. Get access to the timer by disassembling the back top panel. Perform a continuity test and replace the faulty part.

[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]

The Drum Is Not Spinning

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_row_inner css=”.vc_custom_1582906630696{margin-bottom: 10px !important;}”][vc_column_inner width=”1/3″][vc_column_text]

Drum belt

[/vc_column_text][vc_single_image image=”1211″ img_size=”full” alignment=”center”][vc_column_text]

Let’s find out what may prevent your drum from spinning or cause it to spin improperly. The first thing worth checking is the drum belt. If the belt is too loose or ripped it will not spin the drum. To access the belt, unscrew the control panel, open the door and remove the front panel. Inspect the belt for any visual damage and replace it.

[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][vc_column_text]

Drum rollers

[/vc_column_text][vc_single_image image=”1212″ img_size=”full” alignment=”center”][vc_column_text]

Also, you should check the drum rollers. You can tell it is at fault if your dryer makes scraping or chattering sound while operating. Find the location of the part and check its condition.

[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][vc_column_text]

Motor

[/vc_column_text][vc_single_image image=”1214″ img_size=”full” alignment=”center”][vc_column_text]

Finally, the problem with your drum might be related to the malfunctioning motor. Disassembling and replacing a motor might be a very complicated task if you do not have enough experience. We strongly recommend getting professional assistance for motor issues.

[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]

Dryer Is Making Unusual Noise

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/3″][vc_column_text]

Drum bearing

[/vc_column_text][vc_single_image image=”1215″ img_size=”full” alignment=”center”][/vc_column][vc_column width=”1/3″][vc_column_text]

Drum glides

[/vc_column_text][vc_single_image image=”1216″ img_size=”full” alignment=”center”][/vc_column][vc_column width=”1/3″][vc_column_text]

Idler pulley

[/vc_column_text][vc_single_image image=”1217″ img_size=”full” alignment=”center”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]

Drum bearing is a part of the dryer that helps the drum with spinning and maintaining an appropriate speed. Malfunctioning drum bearing leads to unusual noise, while the appliance is operating. It is easy to check its condition by opening the back or front panel. It is usually held within a mounting plate, which is attached to the back of the drum. The function of this part is to support the front of the dryer drum. Since they are made of plastic or nylon, they are very likely to wear out. If so, you will hear unpleasant scraping sound while the dryer is operating. The drum glides are located on the top of the front bulkhead. Determine if there is any damage. The idler pulley is creating squeaking or thumping noise when broken or worn out. Examine the pulley, it should turn without any resistance or noise. To replace it you need to open the front panel and remove the belt from the pulley. Notice that some models require replacement of the whole pulley assembly.

[/vc_column_text][vc_separator color=”blue” style=”shadow” border_width=”3″][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]

Dryer Maintenance Tips

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_single_image image=”1219″ img_size=”full” alignment=”center”][/vc_column][vc_column width=”1/3″][vc_column_text]

It is essential to keep your dryer in working condition to make it serve you as long as possible. Keep in mind these simple tips to increase the lifespan of your appliance.

• After one year of use, the interior and complete exhaust system of the dryer should be cleaned.
• Clean the lint filter either before or after drying each load.
• Always make sure the lint filter is clean before starting a new load because a clogged filter may increase the drying time.
• Do not overload your dryer. Check the owner’s manual to learn the appropriate size of the load.
• Perform a vacuum cleaning around the lint screen area every three months.

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_cta h2=”Get Professional Assistance Today!” txt_align=”justify” add_icon=”left” i_icon_fontawesome=”fa fa-handshake-o” i_background_style=”rounded” i_size=”lg”]

If you are experiencing problems working with your appliance, contact us and get help right away! We are providing the best repair, maintenance and diagnostic service for your broken LG dryer.

[/vc_cta][/vc_column][/vc_row][vc_row][vc_column][vc_column_text][cp_popup display=”inline” style_id=”883″ step_id = “1”][/cp_popup][/vc_column_text][/vc_column][/vc_row]