[vc_row][vc_column][vc_column_text]

Washer Stop Draining. How to get water out?

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Is your washer stop draining? A problem like this may happen. You can get more information, reading Kenmore Washer Is Not Draining. And this post should help you to know how to get water out of your washing machine.

The washing is over or interrupted, but the trouble is that the water is still in the machine. It is important to remember that all actions with the washing machine, regardless of their degree of complexity, must be performed by unplugging the washer. It is also necessary to shut off the supply of tap water. Next, we will consider options for draining water from the washer.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]The need to drain the water from the washer arises both for the machines that completed the programmed work and for those which interrupted the cycle due to a breakdown.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]

• If you have a top-load washer, it’s easier to get the water out with the help of any plastic cup.
• If you’re an owner of the front-load washing machine, it will be a little complicated.

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_hoverbox image=”1405″ primary_title=”” hover_title=”” el_width=”40″]Top-load washer[/vc_hoverbox][/vc_column][vc_column width=”1/2″][vc_hoverbox image=”1406″ primary_title=”” hover_title=”” el_width=”40″]Front-load washer[/vc_hoverbox][/vc_column][/vc_row][vc_row][vc_column width=”1/4″][vc_empty_space][/vc_column][vc_column width=”3/4″][vc_column_text]

1. First, you need to wait 5-10 minutes. After a while, the machine door should unlock. But you should pay attention to the fact that this option is only suitable if you have little water in the unit.
2. Tip the washer slightly backward to the wall so that when you open the door, less water spills onto the floor.
3. Beforehand put rags or towels on the floor near the washer.

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_separator color=”chino” style=”shadow” border_width=”6″][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]If there is more water in the front-load washer, than would be desirable for safe bailing out, it is better not to risk and don’t open the door. You can find out some other options on how to drain water out of the machine below.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_text_separator title=”Option 1″ title_align=”separator_align_left” color=”chino” border_width=”4″ css_animation=”fadeInLeft”][vc_column_text]

With The Help Of Emergency Hose

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/4″][vc_single_image image=”1415″ img_size=”medium” alignment=”center” style=”vc_box_border_circle_2″][/vc_column][vc_column width=”3/4″][vc_column_text]Some manufacturers provide the possibility of the described situations. Some modern washing machines have an emergency hose located next to the washing filter, through which the filled with water washer is easily and simply can be emptied.

This device is located next to the drain system filter. To access it, just open the decorative hatch located at the bottom of the front panel of the machine.

What to do to drain the water:

• Remove the emergency hose from the niche designed for its installation.
• Put a flat container directly below the hole or, if it’s possible, close to it.
• Remove the plug from the hose, put it in a container, and wait until all the water is completely drained.

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_text_separator title=”Option 2″ title_align=”separator_align_left” color=”chino” border_width=”4″ css_animation=”fadeInLeft”][vc_column_text]

With The Help Of Filter Hole

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/4″][vc_single_image image=”1417″ img_size=”medium” alignment=”center” style=”vc_box_border_circle_2″][/vc_column][vc_column width=”3/4″][vc_column_text]This method relates to the most laborious and “dirty.” The drain hole to which the drainage hose is attached is located behind the decorative panel described in the previous case. A filter is installed in front of the hose inside the structure, which, according to the manual needs to be cleaned from time to time.

The drain pump filter is usually located somewhere on the lower front of the washer. This will depend on the brand and model, but some brands don’t have such easy access panels, and because of this, a service call may be required to check.

• Place a pan or a small bucket, towels or rags in front of the exposed panel to catch any draining water
• Open the service cover
• Carefully unscrew the plastic fixture with a filter grill,
• Drain the water.

After completing the drain, remove the device with a filter and clean it. The non-cleaned filter that is the main reason for the machine to stop working[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_text_separator title=”Option 3″ title_align=”separator_align_left” color=”chino” border_width=”4″ css_animation=”fadeInLeft”][vc_column_text]

With The Help Of Drain Hose

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/4″][vc_single_image image=”1419″ img_size=”medium” alignment=”center” style=”vc_box_border_circle_2″][/vc_column][vc_column width=”3/4″][vc_column_text]This is the easiest and quickest way to free the washing tub from the water. However, it is suitable if the drain filter and the drain hose aren’t clogged. Most often, you have to do this if the pump that is pushing water into the sewer is broken.

• The drain hose attached to the back panel of the unit must be unscrewed from the hole
• Put it on the floor previously covered with rags
• The position of the drain hose should be on a lower level
• As soon as water flows from the hose, it must be immediately drained into a nearby bucket. Everything that spilled should be cleaned, without waiting for the indignant neighbors from the apartment below.
• After the machine is free of water, it is necessary to clean the drain hose filter and screw it back.

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_text_separator title=”Option 4″ title_align=”separator_align_left” color=”chino” border_width=”4″ css_animation=”fadeInLeft”][vc_column_text]

With The Help Of Drain Pipe

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/4″][vc_single_image image=”1420″ img_size=”medium” alignment=”center” style=”vc_box_border_circle_2″][/vc_column][vc_column width=”3/4″][vc_column_text]This is a last resort of the drain water through the pipe, as it will require radical measures to dismantle the washer. You shouldn’t use this method without obvious reasons. It is suitable if all of the above options were not successful. Also, it’s better to call specialists.

How to understand that the washing machine needs to be disassembled? A typical sign is the complete absence of water in the drain hole. This means that the inner channel is clogged.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_separator color=”chino” style=”shadow” border_width=”6″][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]If your washing machine doesn’t drain and you are unable to fix the problem on your own, contact us![/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]You can also refer to these videos below.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_video link=”https://www.youtube.com/watch?v=-v4QQcceoH0″][/vc_column][vc_column width=”1/2″][vc_video link=”https://www.youtube.com/watch?v=F4bql6yGhx4″ align=”right”][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][contact-form-7 id=”160″][/vc_column][vc_column width=”1/2″][vc_column_text][cp_popup display=”inline” style_id=”696″ step_id = “1”][/cp_popup][/vc_column_text][vc_cta h2=”We always strive for 100% customer satisfaction.” style=”3d” color=”chino”]Contact us right now![/vc_cta][/vc_column][/vc_row]